Ecco EC5000B-K Guia E Instrucciones De Instalación

The EC5000B-K Camera and Monitor Kit from ECCO is designed to provide a driver with video
from up to three cameras (kit is supplied with one EC2020-C) individually for ultimate driver
awareness. When properly installed and used in conjunction with vehicle mirrors, ECCO's
EC5000B-K assists drivers during hazardous parking and backing situations. This manual
provides information about installation, function, safety, maintenance, replacement parts and
warranty.
!
WARNING!
Failure to install or use this product according to manufacturer's recommendations may result in property damage, serious injury, and/or death to
those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the safety information
contained in this manual
1. Proper installation combined with operator training in the use, care, and maintenance of safety products are essential to ensure the safety of
you and those you are seeking to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing,
which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this safety product. Install this product so that the performance of the
system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing
eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the vehicle opera-
tor should ensure the field-of-view of the camera/monitor is not blocked by vehicle components (i.e., open trunks or compartment doors),
people, vehicles or other obstructions.
6. Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, driving
against traffic, responding at a high rate of speed, walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding
safety products. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no
liability for any loss resulting from the use of this safety product.
Specifications:
Camera
Image
Effective Pixels
Voltage Requirement
Power Consumption
Lens
Lens Angle
Audio
Light Sensor
Infrared LEDs
Pigtail Connection
Housing
Mech. Vibration
Mounting
Dimensions (WxHxD)
Operating Temp.
IP Rating
Approvals
Current Consumption
!
Caution! When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines,
vehicle upholstery, etc. that could be damaged.
EC5000B-K Camera/Monitor System
EC2020-C
CMOS, HD CCD
628 x 582
12V
2 W
12 MM
170°
No
No
None
4 Pin
PC110U
10g
Rear/Front
0.89"x0.89"x1.18"
-22°F to 158°F
IP69K
RoHS
1.8W Max
Installation Instructions
Monitor
Image
Resolution Degree
Controller
Voltage
Power Consumption
Mirror Imaging
Split Screen Feature
AV Compatible
DVR Compatible
Audio
Contrast/Brightness
Light Sensor Day/Night
Camera Selection
Connection: Female
Connection: Male
Connection: CB
Housing
Mounting
Mech. Vibration
Cradle Bracket
Weight
Dimensions (WxHxD)
Operating Temp
Remote Control
Approvals
EC5000B-M
5" Digital, 16:9
800 x 480
Three
12-24VDC
2.7 W
Yes
No
Yes(AV2/AV3 with trigger wire for reversing)
No
Yes
500cd/M2
Yes
V1/V2/V3 switchover
4 PIN
4 PIN
N/A
ABS Plastic
Pedestal Mount
Yes
Plastic
1.76 lbs
5.24"x3.46"x0.98"
-20°C to 65°C
Yes
FCC, CE, RoHS
Page 1 of 5