Eaton Metalux IB519008EN Suplemento De Las Instrucciones De Instalación

IB519008EN
Installation Instruction Supplement – Luminaire with Integrated
Sensor
Supplément aux instructions d'installation – Luminaire avec
détecteur intégré
Suplemento de las instrucciones de instalación de la luminaria con
sensor integrado
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Eaton assumes no responsibility for claims brought
about by improper or careless installation or handling
of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: If supply wires are located within 3 inches of
ballast, use wire rated for at least 90°C (194°F).
Brand Logo
reversed out of
black
INS # INS #