Frigelux RCUA48BE Manual De Utilización página 25

The first time you put your appliance into operation, set the thermostat to "NORMAL" and let it
run empty for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position "MIN" the warmest to "MAX" the coldest.
Appliance thermostat has 6 settings. The appliance assures that temperature is maintained as
long as it is in operation and that it is used in normal conditions of use. The temperature inside
the appliance can be influenced by many factors: ambient temperature, sun exposure, number
of door's opening and amount of food stored... The slight changes in temperature are perfectly
normal:
•
Setting MIN: Refrigerator average temperature is +6°C ~ +8°C.
•
Setting NORMAL: Refrigerator average temperature is +3°C ~ +5°C.
•
Setting MAX: Refrigerator average temperature is +0°C ~ +2°C.
NOTE:
▪
Turning the temperature control to "OFF" position stops the cooling cycle but does not
shut off the power to the refrigerator.
▪
If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before
▪
Restarting the unit. If you attempt to restart before this time delay, the refrigerator will
not start.
▪
If you choose to change the thermostat setting, adjust thermostat control by one
numerical increment at a time. Allow several hours for temperature to stabilize between
adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise too
much.
"
➢ COLD ZONE" SYMBOLS (Depending on models)
You will find the symbol opposite in your refrigerator. It clearly shows the
location of your appliance's coldest zone: the temperature here is + 4°C or less.
A temperature indicator here enables you to check that your refrigerator is
working correctly.
TEMPERATURE INDICATOR (Depending on models)
Temperature to set
Correct temperature
24