WERKU WK403500 Manual De Usuario página 2

ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku ® declares that the WK403500 demolition
hammer is in accordance with the following
Directives and Standards:
2006/42/EC
2014/30/EU
EN 62841-1:2015
EN IEC 62841-2-6:2020/A11:2020
EN55014-1:2017/A11:2020
EN IEC 55014-1:2021
EN 55014-2:2015
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019
EN IEC 61000-3-2:2019/A1:2021
EN IEC 61000-3-11:2019
La Coruña, 01/11/2023
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency ....................... 230-240 V~50Hz
Power ......................................................... 1700 W
Class .................................................................. II
Protection index ............................................ IPX0
Impacts ................................................... 1500 ipm
Impact energy ................................................ 50 J
Chisel connection ...................................... HEX-30
Net weight ...................................................... 14 kg
Acoustic pressure LpA ............................ 83 dB(A)
Respective uncertainity K ..................... 2.35 dB(A)
Acoustic pressure LwA ......................... 103 dB(A)
Respective uncertainity K ................... 2.35 dB(A)
Vibration Ah ........................................... 17.21 m/s²
Respective uncertainity K ....................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been
measured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear ear protection
Wear mouth and nose protection
Double insulation
European conformity
2012/19/EU Directive - Waste
Electrical and Electronic Equipment
SAFETY INSTRUCTIONS.
This power tool is intended to function as a
demolition hammer. Read all safety warnings,
instructions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury. Keep all warnings and all instructions
for future reference. Accidents can be avoided in
many cases by recognizing a potentially hazardous
situation before it occurs and by observing
appropriate safety procedures. Operations for
which this power tool was not designed may create
a hazard and cause personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks
could ignite these materials. Keep away from
children and curious while operating a power tool.
Distractions can cause you to lose control. Keep
bystanders a safe distance away from work area.
Anyone entering the work area must wear personal
protective equipment. Fragments of work piece or
of a broken accessory may fly away and cause
injury beyond immediate area of operation.
2
English