Instrucciones De Montaje; Troubleshooting; Especificaciones - Shure Mvx2U Manual De Usuario

Instrucciones de montaje

La interfaz del MVX2U cabe en un clip de micrófono estándar A25D. Por lo tanto, puede colocarlo en cualquier lado donde
pueda poner un soporte o pedestal de micrófono.

Troubleshooting

Issue
Audio is distorted
General troubleshooting
Note: Contact Shure Service and Repair if you continue to experience any issues.

Especificaciones

Frequency Response
20 Hz to 20,000 Hz
Input Impedance
(@ 1 kHz)
5.8 kΩ
Maximum Input Level
7 dBV
Digital Noise Floor (20 Hz to 20 kHz, A-Weighted)
-105 dBFS
Minimum MIC GAIN setting
0 dB
Maximum MIC GAIN setting
60 dB
Solution
Audio distortion usually comes from overloading the microphone which causes clip­
ping. Lower your mic gain for the best sound recording.
Check that the all cables are correctly and completely connected.
If listening through headphones, check the connection or try using a different pair.
Disconnect and reconnect the MVX2U.
Quit and re-start the app.
Reboot the computer.
Shure Incorporated
7/10