Hardware Contents; Preparation - Style Selections Gad15418L Manual De Usuario

HARDWARE CONTENTS

A
M5 x 12 mm M6 x 12 mm
Screw
Qty. 12

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Hardware Pack
Estimated Assembly Time: Typical assembly is approximately
Tools Required for Assembly (not included): Wrench, Phillips Screwdriver, Work Gloves.
Assembly Tips:
1）Select an area where you will assemble this product. To protect components, choose a smooth
surface that's free of cracks or openings.
2）Spread out all parts.
3）Tighten all hardware connections by hand first. Then,
all hardware. Be careful not to over-tighten. That could damage surfaces or strip threads.
For best results, complete each step in the order presented.
To complete assembly you will need:
1) Leak detection solution .
2) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve connection (standard
grill size) (not included).
CAUTION: Two (2) people will be required for assembly.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only
parts specifically approved with this appliance may result in property damage or personal injury.
B
M5 x 20 mm
Screw
Screw
Qty. 4
Qty. 4
C D
M6 x 15 mm
Step Head
Screw
Qty. 1
Before each step go back and fully tighten
5
E
Battery
Qty. 1
30 minutes.