Cleaning And Maintenance; Troubleshooting - Create Aroma Ceramic Manual De Instrucciones

• Always remove the power cord before cleaning the appliance.
• Essential oil must not come into contact with the outer surface of the unit. Use only 100%
pure essential oil. Do not use scented oils.
• To clean the aroma diffuser, first remove the outer cover, empty the water from the drain
outlet next to the water tank.
• Wipe dry with a soft cloth to avoid build-up of debris.
• Do not use strong detergents.
PROBLEM
No steam output
Steam output is
lower
Light does not
come on
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of danger-
ous substances in electric and electronic equipment as well as their waste disposal. The symbol with
the crossed dustbin shown on the package indicates that the product at the end of its service life shall
be collected as separate waste. Therefore, any products that have reached the end of their useful life
must be given to waste disposal centres specialising in separate collection of waste electrical and
electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment
sent to be recycled, treated and disposed of in an environmentally compatible way contributes to
preventing possible negative effects on the environment and health and optimises the recycling and
reuse of components making up the apparatus. Abusive disposal of the product by the user involves
application of the administrative sanctions according to the laws.
8
E NGL ISH

CLEANING AND MAINTENANCE

TROUBLESHOOTING

CAUSE
Steam outlet is blocked.
Water exceeds the maximum
quantity line.
Water enters the internal circuit.
The humidifier fan does not
work.
Less steam comes out.
The outer cover is not properly
fitted.
The circuit board is burnt.
SOLUTION
Use a swab to clean the outlet
hole.
Keep the water below the
maximum amount line.
Turn off the humidifier and let
the water dry.
Contact after-sales service.
Use a swab to clean the outlet
hole.
Fit the outer cover correctly.
Contact after-sales service.