Remote Control Pairing - Dangbei DBOX02 Manual Del Usuario

4.Remote Control Pairing

ㆍTurn on the projector and wait for the Bluetooth pairing prompt on the screen.
ㆍBring the remote control within 10 cm / 0.33 ft of the projector.
Simultaneously press and hold the
ㆍ
ㆍ Release the keys after the indicator light starts flashing.
ㆍWait until you hear two "beep" sounds, indicating a successful pairing.
* If the pairing is unsuccessful, repeat the above steps until
the remote control indicator light stops flashing.
and keys.
Indicator light
Press and hold for pairing *
10 cm
EN
08