KSIX ODISSEY Manual De Uso

ENGLISH – USER MANUAL
ODISSEY HEADPHONES – BTW01N
1. Characteristics
1.1 Technical specifications
Playtime: 30 hours
Battery: 500 mAh
Frequency range: 20 Hz - 20 kHz
Protection rating: IPX4 (against sweat and rain proof)
Operation range: 10 meters
Frequency range: 2.40GHz-2.480GHz
Maximum transmitted power in frequency ranges: 3 dBm
Noise cancelling: ANC and ENC
Sensitivity: 99dB±3dB at1KhZ
Impedance: 32士15% Ω
Charging time: 3 hours
Weight: 242 g
Material: ABS
1.2 In the box
1 x Headphones
1 x USB-A to USB-C cable (38.6 cm)
1 x Headphones case
1 x Jack cable 3.5 mm (1 m)
1 x Manual
1.3 Product details
1. Volume
2. ON/OFF
3. USB-C port
1.4 Headphones LED indicators
The headphones LED indicator informs about the state of
the connection, among other aspects:
Pairing
Connected
ANC/ENC
modes
Charging
2. Initial setup
2.1 Turn on/off the headphones
To turn on the headphones press the multifunction button
for 3 seconds, you will then hear "Power on". To turn them
off, do the same; you will then hear "Power off".
4. NC button
5. LED indicator
6. Jack port
A blue and red light will flash quickly
until the headphones are paired.
The flashing light will turn off.
A green light will remain steady
when you activate these modes.
A fixed red light will show when you
start charging them. When the
headphones
charged, no light will show.
are completely