Transponder; Frecuency; Symbol Rate; Polarity - FTE Maximal COMPACT 3 HD Manual Del Usuario

USER'S MANUAL USER'S MANUAL COMPACT 3 HD
3.1.2 LNB LOCAL OSCILLATOR LOCAL OSCILLATOR FREQUENCY
Press into the LNB Freq
move the cursor, and then press
oscillator frequency of the LNB as of the LNB as you want.

3.1.3 TRANSPONDER

Press into the TP. Use
cursor then press

3.1.4 FRECUENCY

The frequency of the current transponder, of the current transponder, en ter the value of the frequency
keys.

3.1.5 SYMBOL RATE

The s ymbol rate of the current transponder ymbol rate of the current transponder

3.1.6 POLARITY

Press ◄► key to select polarization key to select polarization horizontal or vertical.

3.1.7 22 KHZ

Press ◄► key to enable or not the 22 KHz tone key to enable or not the 22 KHz tone .

3.1.8 DISEQC 1.0

Press ◄► key set the DiSEqC 1.0 port range from port 1 to port 4. key set the DiSEqC 1.0 port range from port 1 to port 4.

3.1.9 DISEQC 1.1

Press ◄► key to set the DiSEqC 1.0 port range from port 1 to port 16 key to set the DiSEqC 1.0 port range from port 1 to port 16

3.1.10 TONE BURST

Press◄► to select A, B or OFF
Reserved for technical modifications and/or erors
Freq list. Use
press to select the local
TP. Use ▲▼ key to move the
to select TP you want to select TP
or OFF .
▲▼ key to
.
ter the value of the frequency using the number
, use the numbers key to enter the value
-6-
key to enter the value .
Compact 3 HD Version en_1.0 Compact 3 HD Fte maximal