Install The Hardware - Axis Communications M1124 Guia De Instalacion

AXIS M11 Network Camera Series

Install the Hardware

Important
AXIS M11 Series is designed for indoor and outdoor use. To use
the camera outdoors, install in an approved outdoor housing. See
www.axis.com for more information about outdoor housings.
1. If using a microSD card for local storage, insert the card into
the camera's SD card slot, see Hardware Overview on page 10.
2. Attach the camera to the stand by using the included screws.
For wall mounting, attach the stand to the wall first, using
three appropriate screws.
3. Attach the network cable to the network connector on the
product.
4. Check that the indicator LEDs indicate the correct conditions.
See LED Indicators on page 11.
5. Access the camera's live view page, see Access the Product.
6. Adjust the focus and zoom, see page 20.
18