How To Use - Easy Fast Aeo000007 Manual De Instrucciones

STEAM
10
- The plug must be removed from the socket-outlet before the water reservoir
is filled with water
- The iron must be used and rested on a stable surface
- When placing the iron on its stand, ensure that the surface on which the
stand is placed is stable
- The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking
- Care should be taken when using the appliance due to the emission of steam
- Unplug the appliance during filling and cleaning
NOTICE:
- Please check if the voltage of the product is same as the one at your home.
- When using, you are recommended to use the distilled water.
- After using, turn the temperature knob to "OFF" or "MIN".
- Keep away from children when using the steam iron.
- Keep the cord away from the soleplate.
- Always keep the manual well, in case the iron is passed to a third person,
please hand it over together.

HOW TO USE

NOTE:
- The steam brush may give off some smoke when you use it for the first time.
The smoke will disappear after a short time.
Iron Setting
- Rotate the bracket clockwise, put the iron on a stable surface.
FILLING WITH WATER (for steam ironing)
- Please fill this iron with normal tap water before using for the first time.
- For refilling, you can also use tap water. However, if the water is very hard, it
is advisable to use the distilled water.
- Remove the plug from the wall socket before filling the iron.
- Open the water inlet. And use the water cup to fill clean tap water into water
tank up to MAX level.