Programming E53205 With Rml10-Std - Resideo Rml10-Std Manual De Instrucciones

3.9 Programming E53205 with RML10-STD

A B
1. Insert the E53205 (F) into the programming adapter (E).
2. Place the RML10-STD (A) on the positioning guide (D).
The guide nose (C) of the positioning guide must be in the recess (B) on the back of the RML10-STD.
■
3. To switch on the RML10-STD, press the PWR button (G).
4. To activate the infrared interface of the RML10-STD, press the button (H).
5. Perform the programming with the RM App.
13.02.2023
C D
RML10-oi-en1h2602GE23R0223
F
G
E
H
Operation | EN
22