Pepperl+Fuchs Tab-Ex 04 Pro DZ2 Manual Del Usuario página 15

Use only Pepperl+Fuchs-approved battery, charger, and cable specifically designed
for your device. Incompatible battery, charger, and cable can cause serious injuries or
damage to your device.
• Connecting the charger improperly may cause serious damage to the device. Any da-
mage caused by misuse is not covered by the warranty.
• Use only USB Type-C cable supplied with the device. The device may be damaged if
you use Micro USB cable.
To save energy, unplug the charger when not in use. The charger does not have a pow-
er switch, so you must unplug the charger from the electric socket when not in use to
avoid wasting power. The charger should remain close to the electric socket and easily
accessible while charging.
1.
Connect the USB cable to the USB power adaptor.
2.
Plug the USB cable into the device's multipurpose jack.
3.
Plug the USB power adaptor into an electric socket.
4.
After fully charging, disconnect the charger from the device. Then, unplug the
charger from the electric socket.
15
EN