Matco Tools MT2916 Instrucciones De Operación

MARTILLO NEUMÁTICO DE CILINDRO LARGO
MARTEAU PNEUMATIQUE À CYLINDRE LONG
LONG BARREL
AIR HAMMER
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . 33/4"
Blows per minute . . . . . . . . . . . . . . . . . 2300
Bore Diameter . . . . . . . . . . . . . . . . . 0 .750"
Shank Diameter . . . . . . . . . . . . . . . . 0 .401"
Sound Pressure Level . . . . . . . . . .108 .2 dBA
Vibration Level . . . . . . . . . . . . . . . 20 .9 m/s
Maximum Air Pressure . . . 90 PSIG (6 .2 Bar)
WARNING
ALWAYS READ INSTRUCTIONS
BEFORE USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
USER AND BYSTANDERS
ALWAYS WEAR HEARING
PROTECTION USER AND
BYSTANDERS
AVOID PROLONGED
EXPOSURE TO VIBRATION
MT2916, -G, -O
SPE C IF ICATION S
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
Recommended Hose Size . . . . . . . . .
Avg . Air Consumption . . . . . . . . . . . 23 SCFM
Length . . . . . . . . . . . . . . . . . 28 .5cm (11 .2")
Width . . . . . . . . . . . . . . . . . . . . 5 .7cm (2 .2")
Height . . . . . . . . . . . . . . . . . . . . .17 .8cm (7")
2
Weight . . . . . . . . . . . . . . . . . 2 .64kg (5 .8lbs)
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
MT2916
⁄ " I .D .
3
8
WARNING
Copyright © Professional Tool Products, 2019
1
MT2916
MT2916G
MT2916O
• Operating Instructions
• Warning Information
• Parts Breakdown
All rights reserved.
rev. 07/01/19