Be Cool BC50TFWTS Manual Del Usuario página 128

Step 2: Remove the fixing screw from the bottom of the fan housing, unwind
the power cable and pass it through the hole in the fan base. Then add the
base and rotate it to ensure that the two slots are perfectly aligned with the
housing.
Step 3: Tighten the fixing screw (clockwise) and allow the power cable to
pass through the cable duct on the edge of the base to make the product
flatter and more stable. You have now completed the assembly of the tower
fan.
Note: Please note that it is normal that the tower fan with swivel function
may wobble slightly or appear unstable. This is to ensure that the fan does
not immediately fall over when touched and that it performs the swivel
function properly.
128