Descargar Imprimir esta página

ERSA i-CON 2V MK2 Manual Breve página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
1.
For your safety
Safety Notes
Ersa products are developed, manufactured and tested in compliance with essen-
tial safety requirements.
Residual risks nevertheless remain!
You should therefore read these instructions before you start to operate the tool
for the first time. The instructions will help you operate the soldering tool safely as
well as becoming acquainted with all functions and properly using them.
The enclosed information leaflet "Safety Notes" is also part of the safety instruc-
tions to be adhered to.
National and international safety, health and occupational safety regulations must
be complied with.
Danger due to improper operation
Risk of accidents! Do not damage the components of the soldering tools!
4
DANGER
a) Comply with the operating instructions!
b) Every person involved in the commissioning, operation and/or maintenance
of the soldering tool must have read and understood the "Safety Notes" and
chapter "For your safety", as well as the chapters in these operating instruc-
tions relating to the above tasks!
c) For the operation of the soldering tool, the local safety and accident preven-
tion regulations must also be adhered to!
d) Always keep these instructions near the soldering tool, in a place accessible to
all users at all times!
CAUTION
a) Check all components before each use!
b) Do not operate the soldering station if it is damaged!
c) Repairs may only be carried out by a specialist or the manufacturer!
d) Use only original Ersa consumables and spare parts.
e) Do not perform any retrofitting!
Otherwise, the warranty will become null and void.
f) Never operate the soldering iron without the soldering tip, overheating haz-
ard!
3BA00270 | Rev. 1
For your safety
Ersa GmbH

Publicidad

loading

Este manual también es adecuado para:

0ic2205v0ic2205vit