Setting The Opening Position; Deleting The Limit Switch Positions; Deleting The Opening Limit Switch; Deleting The Opening And Closing Limit Switch - Cherubini Blue Wave Rx Serie Manual De Instrucciones

After setting the closing position, open the awning until the necessary opening position
by pressing the "down" button. you can use the "up"/"down" buttons to precisely set the
opening position. To set the opening position, hold pressed the "stop" button (around 2
sec) until the motor performs a short "up" movement.
T1: Already programmed remote control
C

deleTing The limiT SwiTch poSiTionS

It is possible to completely delete the opening and closing limit switch positions, or to just
delete the opening limit switch position.

deleTing The opening limiT SwiTch

To delete the opening limit switch follow the described steps. The new opening position
can be set as previously described.
Tn: Already programmed remote control
B + C
Tn

deleTing The opening and cloSing limiT SwiTch

Tn: Already programmed remote control
B + C
Tn

SeTTing The opening poSiTion

down
Tn
B + C
B + C
B
up
Tn (2 sec)
Tn
Tn
31
C
Tn (2 sec)
B + C
Tn (4 sec)