Connecting The Camera; Connecting And Using Multiple Cameras - Insta360 CINSAAVG Instrucciones De Uso

press the power button to turn off the remote.
When powered on and with the camera connected, long press
the power button to select from the three options: turn off the
remote, turn off the camera, or turn off both.
4.2. Connecting and Waking up the Camera

4.2.1 Connecting the camera

1. Long press the power button to turn on the Remote.
2. Press the power button on the camera to turn it on.
3. Click "Insta360 GPS Preview Remote" on the camera's
Bluetooth Remote interface. When the camera's screen
displays Connected, it has been paired successfully.
Important:
• Be sure that your camera's firmware has been updated to the
latest official version.
• The remote can be used up to 26.2ft (8m) for effective
preview and 65.6ft (20m) for effective control in optimal
conditions.
• For support of cameras, please stay tuned for Insta360's
official website and its future firmware updates of the
remote.
• After connecting to the remote for the first time, the device
can wake up the camera within its effective range without
repeating any pairing steps.

4.2.2 Connecting and using multiple cameras

To connect with another camera, swipe down from the top of
the remote's watch dial to enter the connecting interface and
tap . The remote will be ready to pair. Enter the Bluetooth
Remote feature on your camera and connect to the remote.
To connect with more cameras, repeat the process.
Notes:
• The remote can control up to 4 cameras at a time. Note that
the camera recognizes only one remote at a time.
• When connected with multiple cameras, the Remote will only
show the quantity of the connected cameras and won't display
other states.
3