Tech Specs - Slime 40080 Manual De Instrucciones

Ensure that the vehicle is outside, or in an open, well-ventilated area and NOT INSIDE A
CONFINED AREA, SUCH AS A GARAGE as bodily injury or asphyxiation resulting in death
could occur. Always operate the inflator in a well-ventilated area free of combustible materials,
gasoline, or solvent vapors. Always set parking/emergency brake and ensure vehicle is in Park
(or neutral if equipped with manual transmission).
CAUTION: HOT!
• Do not attempt to disassemble inflator.
• No user serviceable parts inside.
• Keep inflator out of reach of children.
• Ensure air hose chuck touches the core of the valve stem for proper inflation.
• DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool
approximately 25 minutes between uses. Do not leave inflator unattended.
• ALWAYS use a pressure gauge to check tire pressure. DO NOT over-inflate.
• Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be
careful not to inflate items beyond their capacity.
• While operating, never block the inflator input or output.

TECH SPECS

TIRE INFLATION TIME
CFM (LPM)
DIGITAL GAUGE
TOTAL REACH
POWER SOURCE
* (0-35 PSI, Standard Tire: P195/65 R15)
USING THE ADAPTERS
PULL UP
TO LOCK
PULL DOWN
TO UNLOCK
VEHICLE EXHAUST WITHOUT PROPER VENTILATION IS EXTREMELY
DANGEROUS. ALWAYS ALLOW FOR PROPER VENTILATION.
4 min*
0.95 CFM (26.9 LPM) @ 0 PSI
PSI 0-99, BAR 0-7
2 ft. (0.6 m)
Rechargeable lithium-ion battery
1. To unlock the quick connect, pull
handle down.
2. Place the adapter into connector
and pull up on handle to lock in.