Descargar Imprimir esta página
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug
the product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal
circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color
change, etc.),discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to
incinerate it)
Do not leave this product unattended while it is in use or while it is being charged
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port wall adapter (not included)
Do not re-charge via USB port on a computer
Do not use this product while it is being charged
When not being used for prolonged periods of time please charge every 3 months to avoid
damaging the battery
The T246 is a Wireless 2.1 + EDR speaker with FM radio and a TF card reader. Please see below
user instructions.
T246 Specifications
Battery Type: Grade A lithium-ion rechargeable battery
Battery Duration/Lifespan: 300 times
Capacity: 400 mAh
Power Input & Current: 5V/500mAh
Sound Output: 3W x 1
Sensitivity: 65dB
Frequency Response: 280HZ-16KHZ
Distortion Rate: 1%
WARNING
Safety Precautions
T246 User Manual
loading

Resumen de contenidos para Spector&Co T246

  • Página 7 Si el producto no se utiliza por largos periodos de tiempo, hay que cargarlo cada 3 meses para evitar dañar la batería. Manual del usuario del T246 El T246 es un parlante inalámbrico 2.1+ EDR con radio FM radio y lector de tarjeta TF. Sírvase leer a continuación las especificaciones e instrucciones del producto. Especificaciones del T246 Tipo de batería: Polímero de litio recargable grado A...
  • Página 8 Azul parpadeará rápidamente para señalar que el parlante está listo para apareamiento inalámbrico. 2. Activar la función Bluetooth en el dispositivo electrónico. 3. Buscar la señal Bluetooth Spector T246 y aparear el dispositivo (LED Azul en el T246 permanecerá encendida para señalar que los dispositivos están apareados). Modo inalámbrico 1.
  • Página 9 5. Presionar sobre la tarjeta para eyectarla. Carga del T246 1. Insertar micro USB en el T246 y conectar la salida USB a una adoptador de toma de corriente mural (no incluido). 2. LED roja señala que el dispositivo se está cargando (LED roja se apagará un vez terminada la carga.