Installation Steps - Superun Ct04 Manual

07. INSTALLATION STEPS

Installation steps
01
Open the package, take out the assem-
bly material in the box and lay the main
unit flat on the ground.
02
Wrench open the quick release wrench and
wrench it in the direction shown by the
arrow, (as shown in the figure below).
10
03
erect the column in the direction of
the arrow.
07. INSTALLATION STEPS
05
Insert the PAD frame.
04
Fasten the quick release wrench after the
column is erected in place to achieve column
fixation.
06
electronic table yellow sticker position put
on the safety switch, power can operate
the treadmill operation.
07
column down and restart the machine, the
speed is 0.6 ~ 3.8mph. (remote control)
(Reminder: walk when the PAD frame do not
Safety switch
inserted in the electronic table button shell)
11