FTE Maximal MAX COMBO NET Manual De Usuario página 20

MENU GUIDE
II. INSTALLATION
II-2. DiSEqC Switch
1. Select Channel Search in Installation using
and press OK.
a) If you select DiSEqC Switch and press OK on the
menu will be, DiSEqC Switch Page will be dis-
played.
b) Select the proper Satellite of each DiSEqC port
(A~D) using
Selected Satellites will be searched automatical-
ly.
II-3 Motor Setup
1. You can move the cursor using
when you select the value that you want.
a) Motor Type : DiSEqC 1.2, GOTO-X
- Press OK to display Motor Type
- Select the proper Motor Type and then press OK.
b) Satellite
- Press OK to Display the Satellite List Box
- Select the proper Satellite and then press OK.
c) Drive & Driver Step
- Select the direction using
d) Frequency
- Press OK to Display the Frequency List.
- Select the proper Frequency and then press OK.
e) Motor Movement
- Search the appropriate position of the selected
Satellite using
16
(2012 11 05) manual.indd 20
MAX_COMBO_NET_manual_print REV2.0.pdf 20 MAX_COMBO_NET_manual_print REV2.0.pdf 20
and and press SEARCH.
and press OK
.
.
2012-11-05 8:48:13
31/01/2013 12:51:41 31/01/2013 12:51:41