Paso 4 Tools Required; Paso 5 Ver Imágenes De Alta Resolución - Prusa Research Mmu3 Manual Del Usuario

PASO 4 Tools required
The required tools are available as an optional bundle:
Needle-nose pliers (1x)
Universal wrench (1x)
Philips PH2 screwdriver (1x)
Allen key 1.5mm (2x) the short and long one
Allen key 2mm (1x)
Allen key 2.5mm (1x) the short and ball-end long one.
For some chapters, as an extra, we advise considering:
- a measurement tool; a caliper or digital caliper would work the best. Or - you can
print one.
- Flush cutters might come in handy during the assembly too.
PASO 5 Ver imágenes de alta resolución
10
1. Introducción
Ensamblaje Original Prusa MMU3
Cuando utilizes el manual en la web
help.prusa3d.com, puedes ver las
imágenes originales en mayor
resolución para mejor claridad.
Just hover your cursor over the
image and click the Magnifier icon
("View original") in the top left
corner.