Flash Photography - Lomography Diana F Plus Manual De Instrucciones

INSTRUCTIONS FOR USE

FLASH PHOTOGRAPHY

As you've surely seen, your Diana F+ includes a gorgeous Electronic Flash [16] – inspired by
the 60s design of the original Diana flash units. First off, open the Flash Battery Door [18] and
insert one fresh "AA" battery inside. Attach the Flash to the Diana F+ body by plugging it into
the Metal Pin Shoe [17]. Turn the Flash Power Switch [19] to "On." The Flash Ready Light [21]
will glow bright red. The Flash will now fire when you depress the Shutter Release [7]. With
ISO 400 film, the Flash's effective range is approximately 1–1.5 m (3–5 ft). For best results, stay
within this distance to your subject – and be sure to adjust the focus accordingly. To increase
the range, use faster film.
For your Aperture Setting [9], we recommend setting it to "Cloudy." Be sure to turn the Power
Switch [19] off when you're done shooting – so that you don't drain the battery.
1. Set your Shutter Speed Switch [8] to "N" to take your typical flash snapshot. Try this during
the daytime on an overcast day or with your subject in shadow for a great fill-flash effect.
2. At night, set the Shutter to "B" to create a mixed flash & ambient light image. When you
press the Shutter Release [7], the Flash [16] will fire. Hold it down for a few seconds longer to
bring in the ambient light – thereby placing a glowing, dreamy background behind your crisp,
13