Sunex Tools SXSN6P01 Instrucciones De Operación

Operating Instructions • Warning Information • Parts Break down
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR EYE PROTECTION WHEN
OPERATING OR PERFORMING MAINTENANCE
ON THIS TOOL
ALWAYS WEAR HEARING PROTECTION WHEN
OPERATING THIS TOOL
AVOID PROLONGED EXPOSURE TO VIBRATION
TO REDUCE EXPOSURE TO SANDING
DEBRIS, WORK IN A WELL VENTILATED
AREA WITH PROPER PERSONAL
PROTECTION EQUIPMENT.
Weight ....................................1.87
Length .........................................7.75"
SXSN6P01: Parts Breakdown & Operating Manual
WARNING
SPECIFICATIONS
LB Air Inlet ................................. 1/4" NPT
Recommended Air Pressure ....90 PSI
3/16" ORBITAL PALM SANDER
Some dust created by power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
1
SXSN6P01
WARNING
© Copyright 2023, SUNEX Tools
®
1/3/23