Robern INLINE MLC36IKSSVCK Instrucciones De Instalación

CONTENTS
SWAY CONTROL / MODEL NUMBERS - 2
TOOLS NEEDED / PARTS - 3
NOTES - 4
REPLACING ENDCAPS - 5
ASSEMBLING THE BRACKETS - 5
MOUNTING THE BRACKETS TO THE CABINET - 6
MOUNTING THE BRACKETS BETWEEN CABINETS FOR GANGING - 7
ELECTRICAL ENCLOSURE AC POWER CONNECTIONS - 9
ELECTRICAL ENCLOSURE CONTROL WIRE CONNECTIONS - 10
SWAY WALL CONTROL- 11
RECESSED INSTALLATION AND ELECTRICAL WIRING- 11
SURFACE INSTALLATION AND ELECTRICAL WIRING- 12-14
FINAL ASSEMBLY - 14
PRODUCT ALIGNMENT - 15-17
USE & MAINTENANCE / WARRANTY - 17
GENERAL INFORMATION
This instruction sheet contains information on how to install the Tenor Tunable Light(s). This series comes in many variations. Please refer to the box or
product label for the specific model number. A key is provided on page 2.
Save these instructions for future use and reference. An improper installation voids the warranty. Carefully inspect the light(s) for damage. Installed
products cannot be returned.
If you experience any problems with your light(s), contact your dealer or Robern directly.
Limited Warranty - One Year Term
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
INLINE
Important safety instructions - Save these instructions
Scan the QR code
to see the entire
Inline Series
of lights.
Use the camera app on your
mobile device to look at this and
other QR codes. This will allow
you to quickly access web pages
and other relevant documents.
1
TUNABLE LIGHT
™
Installation Instructions
Suitable for damp locations
This product re-
quires Robern Sway
Wall Control to
function
(sold separately).
See Page 2 for more
info
Part no. 209-1426 || 09-MAY-2023
Inline™ Tunable Light