Onkyo TX-RZ70 Manual Del Usuario

Preamp Mode
Preamp Mode allows you to switch amp output to OFF if you have connected a
power amp to the unit and would like to use the unit as a preamp. This allows
you to use the pre-out jacks only.
Setting
on the remote control and select "Miscellaneous" - "Preamp
1. To set, press
Mode".
• You cannot select this setting if you have not set "Speaker" - "Configuration" -
"Bi-Amp" in the Setup menu to "No".
‰ Preamp Mode (Default Value：No)
Select the speaker terminals for which you would like to set the amp output to
OFF.
No Select to not use this function.
Both the amp and preamp will be outputted simultaneously.
Front Sets amp output of the front speakers to OFF.
All Sets all amp output to OFF.
Select to use the unit as a preamp.
1