Preparation Of Operation - Wolfpack Hrh24S Manual De Instrucciones

PREPARATION OF OPERATION

HOW TO SET UP YOUR UNIT
(---Ignore the installed accessories in the corresponding step---)
1. Attach the gun, quick lance and adjustable nozzle
A. Attach the quick lance to gun
Note: When attaching, align the two projections on the lance with the grooves on the
gun.
B. Attach the adjustable nozzle to the spray lance.
···
Operation when the nozzle fails to detach from the lance.
(1) Push the nozzle inward, make
sure there's no gap between
nozzle and lance head.
(1)
2. Mounting the wheel assembly
Install the wheels on the rear housing and press them down.
Push the nozzle inward
till there¯s no gap.
Plastic sleeve of the spray gun
Pull forward before rotating.
Rotate the rotary sleeve by
360 degrees to change
the angle of the anything.
(2)
Grasp the nozzle and lance head with
two hands and pull them to reversed
direction, the nozzle will be detached.
(2)
51
···