Replacing The Fuse - Intec C-01 Manual Del Usuario

PROBLEMS/SOLUTIONS
The compressor will not start:
1. The fuse inside the cigarette lighter connector has blown. Replace with supplied fuse following
instructions
2. The setting pressure is lower than the tire pressure. Adjust the desired pressure to a higher
value

REPLACING THE FUSE

1. Unscrew the connector nut with pliers
2. Pull out the fuse
3. Replace the fuse
In accordance with the law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible
recycling facility.
English
11