Connect The Power Cord - Honeywell Home Rchc4100Wf1002 Guía De Instalación Rápida

Installation
Launch the Honeywell
Home app
1 Launch the Honeywell Home app.
2
Create an account (if necessary),
or sign in to your Honewell Home
account. Tap ADD DEVICE or the plus
sign.
3 Select the C1 Wi-Fi Camera to install,
then follow the instructions in the
Honeywell Home app to name the
camera and its location.

Connect the power cord

1 Remove the camera base and
plug the power cord's USB
end into the camera.
2 Reinsert the camera base
and plug the camera into a
power outlet.
3 Wait until the LED on the
camera blinks blue (about 1
minute), then tap NEXT.
NOTE: If the LED turns solid red,
it means the connection mode
timed out. Unplug the camera and plug it back in.
2