Cleaning And Care - Nave Doris Manual De Instrucciones

Designation
Kelvin
Operation
Timer function
▪
Slide the ON/Off/Timer switch to the "Timer" position to activate the timer function. The product lights
up for 6 hours and then automatically turns off for 18 hours. After that, it will automatically turn on
again and light up again for 6 hours.

Cleaning and care

Damage to the product
▪
Do not use any solvents for cleaning.
Non-compliance with this instruction can cause damage to property.
▪
Only clean the product when it is switched off and has cooled down.
▪
Limit the care of luminaires to the surface only.
▪
Prevent moisture from getting into connection compartments or on live parts.
▪
Use a soft, dry cloth for cleaning.
Repair and Spare parts
Unsuitable parts
▪
Use original spare parts and accessories from the manufacturer only.
Non-compliance with this instruction can cause damage to property.
In case of complaint, contact your responsible specialist dealer or contact our service hotline directly.
▪
Telephone number: +49 (0)7947 9100-0
▪
E-mail: info@naeve.de
For technical questions, please state the order number (e.g. 16648). The order number can be found on the type
plate.
5300622_Manual_16814_V1.docx
Abbreviation Value
K 2700
7 / 23
Pictogram Explanation
Colour temperature / light colour
NOTE
NOTE
V1.4/22