Installing The Ribbon; Inserting Slip Paper - Epson Tm-H6000Ii Manual Del Usuario

English
Installing the Roll Paper
See illustration D.
CAUTION:
Caution label for autocutter blade.
Note:
Do not use paper rolls that have the paper glued or taped to the core because they
might cause a paper jam.
To prevent paper jams, make sure that nothing obstructs paper coming out of the
paper exit, and do not pull the paper out of the printer.

Installing the Ribbon

See illustration E.
Use the EPSON ERC-32. The use of any ribbon cassettes other than
those approved by EPSON may damage the printer and will void the
warranty.
1. Turn on the printer. Turn the knob on the ribbon cassette. Open
the front cover of the printer, and insert the new ribbon.
2. Turn the knob 2 or 3 times, and check the ribbon position.

Inserting Slip Paper

See illustration F.
CAUTION:
Be sure not to insert any magnetic stripe cards into the slip section.
Otherwise the magnetic information will be damaged.
Note:
Be sure that the slips are flat, without curls, folds, or wrinkles.
6 TM-H6000II with Image Scanner User's Manual