Software; Usb Drivers; Megalogg2 - Megabras Dt70Kv Manual De Uso

11. Software

11.1. USB Drivers

To install the USB drivers required for the communication between PC
and equipment follow the instructions:
1. Connect the equipment in the PC using the USB cable.
2. If there is an available internet connection, Windows will silently
connect to the Windows Update website and install any suitable driver
it finds for the device.
3. If no suitable driver is automatically found then you need to insert the
CD-ROM, supplied with the equipment, in the PC, run the executable
"usb-install.exe" and click in "Install".

11.2. MegaLogg2

This software makes communication between the equipment and a
computer with Windows operative system easier. It makes it possible to
synchronize the date and time of the equipment internal clock with the
computer date and clock, to transfer the stored date, to clear the memory,
to generate test reports, etc.
25
70KV
DT