Allen + Roth RIGSBY RGWM2230 Manual Del Usuario página 4

INSTALLATION INSTRUCTIONS
Step 2: Hanging the Mirror
2a. Use a hammer to gently punch the anchor
(AA) halfway into the wall at each marked
location. Finish screwing in the anchor (AA)
with the screwdriver.
2b.
Using the screwdriver, insert the screws (BB)
into the anchors (AA), leaving approximately
1/8 in. of the screw (BB) revealed.
2c. Hold the mirror (A) in place against the wall
and line up the mounting hooks with the
screws (BB).
2d.
Loop the mounting hooks over the screws
(BB) to hang the mirror (A).
NOTE: Mirror can hang vertically or horizontally.
2
AA
4
BB
A
A