Placa Base; Removing The System Board - Dell Optiplex 5080 Micro Manual Del Usuario

Placa base

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the hard drive
5. Remove the solid-state
6. Remove the WLAN card.
7. Remove the fan assembly.
8. Remove the heat sink.
9. Remove the memory modules.
10. Remove the speaker.
11. Remove the processor.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
before working inside your
assembly.
drive.
computer.
Desmontaje y reensamblaje 47