Geographical Adjustment Factor; End Calibration - Ohaus 3000 Serie Instrucciones De Montaje

3000 Series Indicators

3.3.3 Geographical Adjustment Factor

The Geographcial Adjustment Factor (GEO) is used to compensate for variations in gravity.
Note: Changing the GEO Factor alters the calibration. The GEO value was set at the factory and should only
be changed by an authorized manufacturer's representative or certified verirication personnel.
Refer to table 3-2 to determine the GEO factor that corresponds to your location.

3.3.4 End Calibration

Advance to the next menu.
EN-17