Cleaning The Machine; Stop The Machine - Ecotech Italia H24 Lynx Manual De Uso

CLEANING THE MACHINE

Follow the procedure below.
1. Place the machine on a stable and flat surface.
EN

2. Stop the machine

3. Let the engine cool down appropriately.
4. Wear the personal protection devices required
to protect airways (anti-inhalation masks) and
eyes (goggles).
– Use a compressed air jet to remove all proces-
sing residues.
– Remove the processing residues from the cut-
ting deck.
Caution - Warning
Do not use water jets under pressure.
– Clean all metal surfaces with suitable products.
– NEVER use cleaning products that are cor-
rosive and inflammable and/or products that
may contain or release harmful substances.
138