Bluetooth Communication; Chlorination Test; Settings Reset - Flowdians BLUE HydraSalt PRO Connect Instrucciones De Uso

3.6.21. Bluetooth communication

Menu Setting
Mode
Pairing
Reset
During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
flash alternately.

3.6.22. Chlorination test

This function is for use by professionals for maintenance operations on the equipment.
Menu

3.6.23. Settings reset

Menu
Activation/deactivation
communication.
Detection of connectible devices near
the electronics unit (within 60 seconds).
Networking of the electronics unit and
connected devices.
Removal of the network connecting the
electronics unit to the connected devices.
OK
(Wait a few seconds)
or
or
Press and hold.
OK
Resetting the parameters cancels all the settings made (factory configuration).
Function
of Bluetooth
Navigation
-time timer countdown
Currents and voltages supplying the cell, on each direction of
polarity inversion (values for illustrative purposes only).
Important warning
I
Possible settings Default setting
ON
OFF
-
ON
13