EN
2.1
Plan A
:
1 Attach the leg to the panel (P04 & P05) and use it as a reference point.
2 Keep the towel upright. Mark out and install the rest of the legs.
Plan B
:
1 Attach the leg to the panel and use it as a reference point. Note to keep
the distance between (P03) and power source within 1 meter
(39.3 inches).
2 Keep the towel upright. Mark out and install the rest of the legs.
H ardwired Installation
P lug-in Installation
2
1
2
1
06