topmark JESSY Instrucciones De Uso página 13

USING
Assemble the back tube (fig. 3a/4b)
Take the curved tube, fix it onto the frame. Make sure the spring button comes out
of the hole and the tube is fixed firmly onto the frame.
Then the bouncer will look like fig. 3b.
EN
3a 3b
Adjusting the backrest (fig. 4a/4b)
Press the second safety buttons first and pull backwards the levers of the jointer at
middle left and right side to adjust the seat back positions (4a).
When it reaches the desired position, pull forward the levers to maximal vertical
position to fix it (4b).
4a 4b
13