Factory Reset; Battery Management; Charge Battery - dServe DSRV 9703C Manual De Instrucciones

Instruction manual dServe 9703C Multi

12 Factory Reset

To restore the tablet to original factory settings and erase all personal
informations, tap on "Settings" > "Backup&reset" > "Factory data reset".
Warning: After resetting the device, Google account, data, system settings,
and downloaded applications will be removed from your tablet.

13 Battery Management

The battery is not fully charged from factory, so it is recommended that
you charge the battery for at least 6 hours before you start to use the
device.
The rechargeable battery is designed and manufactured to be used and
recharged frequently. As same with all of lithium batteries, the capacity of
the battery reduces each time it is charged. However, you can still try to
prolong the battery's lifetime by following the suggestions below:
- Use your Tablet at least once a week.
- Fully charge the battery regularly.
- Never leave the battery fully discharged for a long period of time.
- Always keep the device and the battery away from heat and moisture.

14 Charge Battery

Plug the power adapter into an electrical wall outlet and then connect to
the device to fully charge the battery before use.
When fully charged, the battery icon displays as:
A fully discharged battery will take you approximately 6 hours, but you can
use the device while it is being charged.
Do not use other adapters than the one provided in your packaging, it may
cause damage to the Lithium battery inside.
Do not attempt to open the tablet to replace the battery inside, this will
damage the tablet and void the warranty.
14-05-2012
3 2
13:15 Pagina 32