Midwest Feline Nuvo 136C-SL Manual De Instrucciones

Assembly Instructions for Model Number 136C-SL (Cosmo)
IMPORTANT INFORMATION
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you discover
any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday 9 a.m.
to 4 p.m. EST) or at info@midwesthomes4pets.com.
PARTS IDENTIFICATION
A - Two-Story Circular Cubby
B - Legs (4)
C - Dome Head Screws (4)
D - Allen Wrench
E - Pillow
ASSEMBLY INSTRUCTIONS
1.
Attach the Legs (B) to the Two-Story Circular Cubby (A)
using the Dome Head Screws (C). The screws should be
placed inside the Cubby and down through the holes in the
bottom. The legs attach to the outside bottom of the
Cubby. Use the Allen Wrench (D) to tighten each screw.
2.
Place the Pillow (E) in the lower level Cubby.
A
B
800-428-8560
midwesthomes4pets.com
P .O. Box 1031
Muncie, Indiana 47308
C
- 1.6in (40mm)
D
E
1