Attaching Hook Plate To Display With Vesa 75 Or 100 Mounting Pattern - Peerless-Av Pt632 Instalación Y Ensamblaje

Attaching Hook Bracket to Display with VESA 75 or 100 Mounting Pattern
®
NOTE: For VESA 200 x 100 mm and 200 x 200 mm hole patterns, see following page.
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
®
FOR VESA 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
2
bracket (B) to back of display using four
M4 x 10 mm screws (F) as shown below.
Skip to step 4
B
F
WARNING
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of display using four
M4 x 10 mm screws (F) as shown below.
Skip to step 4
B
F
6 of 26
ISSUED: 08-11-11 SHEET #: 203-9038-1