Manual Setup - HP Smart Tank 210 Serie Guía De Referencia

Manual Setup

1 Fill the ink tanks
1. Open the front door.
3. Twist open the ink bottle.
5. C lose the ink bottle, firmly pushing the cap
onto the bottle.
Note: If there is ink left, close the bottle properly and
store upright in a cool, dark place.
7. Repeat to fill all tanks.
4
2. Open the cap of the ink tank you want to fill.
4. Place the bottle upside down on the tank and
click into place. Wait for the ink to fill the tank.
Note: The black bottle will have ink left.
6. Close the tank cap securely.
8. After filling all tanks, close the front door.
Wait approximately 15 seconds for the printer
to check ink.
15