Swing-Away Removal; Pad Adjustment - Stealth Products Rlspkg100 Manual De Usuario

Swing-Away Removal

The red button lock (D) allows the hardware to swing away or be removed to assist
in transfers. To swing the hardware away:
1. Press the red button lock (D) and swing the hardware 90º to the side.
2. Lift for removal.

Pad Adjustment

The pad's position can be adjusted if more depth is required for the user.
1. On the underside of the pad, loosen the two screws (C) on the cane clamp with a
3/16" hex key until the position can be adjusted on the horizontal tube.
2. Adjust to the desired position, then tighten the screws.
Pad is shown upside
down for clarity.
EN
Installation
4