Elived EV014 Instrucciones De Instalación página 6

2A-3
Use the wrench
Install wall plate
Tighten the lag bolts
STEP 2B Wall Plate Installation (Wood Stud)
2B-1
2B-2
Mounting template
05
if you don't have socket wrench in hand.
05
by using lag bolts
01
until they are pulled firmly against the wall plate
A
Bubble Level
01
, washers
A
Locate your studs. Verify and
mark the center of the studs by
finding the stud edges using an
awl, a thin nail, or an
edge-to-edge stud finder.
Position the mounting template
at your desired height and line
up the holes with your stud
center line. Level the mounting
template and mark the pilot hole
locations.
V2
- 6 -
and anchors.
B
.
01