Description Of Function; Technical Data - Resideo Braukmann Fk06-101-Dus-Lf Dialset Instrucciones De Instalación

BRAUKMANN FK06 DIALSET®
DESCRIPTION OF
FUNCTION
The filter combination integrates a pressure
reducing valve and a rinsable fine filter
cartridge in one appliance.
During normal operation, water flows through
the filter mesh to the body outlet. To rinse the
filter, the ball valve is opened which
discharges the dirt particles. A continuous
supply of filtered water is available also
during the rinse cycle.
The integral pressure reducing valve
functions on a balanced force principle
whereby the force exerted by a diaphragm is
balanced against the force of an adjustment
spring. The inlet pressure has no influence on
opening or closing of the valve. Inlet pressure
fluctuation does not therefore affect the
outlet pressure.
APPLICATION
Medium: Water
Inlet pressure: 250 psi (17.24 bar)
Outlet pressure: 25–90 psi (1.5–6 bar)
The filter is constructed for drinking water
installations. In case of a process water
application the filter has to be proven
individually.
WARNING
Install indoors only. Do not use in
applications where UV radiation and
solvent vapors are present.

TECHNICAL DATA

Model: FK06 DialSet Pressure Regulating Fil-
ter Combination.
Installation Position: Horizontal with filter
bowl downward.
38-00059EFS—11
Regulator Mechanism: Fabric-reinforced
diaphragm.
Filter Mechanism: Stainless steel 50 micron
rinsable filter insert.
Seat Design: Balanced single seat construc-
tion.
Inlet Pressure (Maximum): 250 psi maxi-
mum.
Reduced Pressure Range: 25 to 90 psi
(3/4 in. to 1-1/4 in.).
Outlet Pressure: Factory set at 60 psi
(414 kPa).
Dial Calibration: ± 4 psi.
Differential: 14.5 psi minimum (inlet to out-
let).
Fluid Temperature (Maximum):
Water: 140°F (60°C).
Ambient Temperature Range: 33° F to 140° F
(1° C to 60° C).
Max Operating Pressure: 250 psi (17.24 bar).
Max Operating Temperature: 140°F (60°C).
Connection Size: 3/4" (19 mm), 1" (25.4 mm),
1-1/4" (31.7 mm).
Pipe Sizes Available: 3/4 in., 1 in., 1-1/4 in.
available.
Connections: Can be configured as female
thread-by-thread, double-union, NPT
threaded or sweat.
Low Lead Content: <0.08% Lead.
Gauge Tap: 1/4" NPT.
Body: Lead-free ECO BRASS
Approvals: ASSE 1003-2020 Listed, CSA
B356 Listed, IAPMO Listed, NSF/ANSI
61/372 Compliant.
SCOPE OF DELIVERY
The filter combination consists of:
• Housing with pressure gauge connections
on both sides
• Threaded or sweat connections, based on
model
• Valve insert complete with diaphragm and
valve seat
2
®
.