Hanging The Fan - Kichler 65 Imari Manual De Instrucciones

HANGING THE FAN

REMEMBER to turn off the power before you begin.
To properly install your ceiling fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the canopy by
turning the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by removing
and saving one of the two screws. Loosen the remaining screw by a half turn.
(Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box through the
center of the ceiling mounting bracket. (Fig. 6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the
screws and washers included with the outlet box. (Fig.6)
6 | KICHLER.COM
Hanger Bracket
Ceiling
Canopy
Canopy
Cover
Fig. 5
cULus Listed
Electrical
Box
Ceiling
Mounting
Bracket
120V Wires
(Supplied with Electrical Box)
Fig. 6
Washers
Mounting Screws