Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4

Enlaces rápidos

DC111 Magnetic Contact Installation Sheet
EN DE ES FR
IT
NL PL PT SV
3.5 in.
89 mm
4.25 in.
108 mm
EN: Installation Sheet
Description
DC111 is a triple biased surface mounted magnetic contact
that can be connected to a burglar alarm system. For
additional security it also includes a magnetic field tamper and
pry-off tamper. DC111 can be used on ferromagnetic and non-
ferromagnetic environments and doors.
Mounting
The magnetic contact and the magnet should be mounted
parallel to each other and with the text facing the same
direction, using screws.
If pry-off tamper supervision is required, mount the tamper
plate (item 1) in the desired position using two middle holes
(item 2), and then mount the contact. To align the contact and
the magnet positions, if necessary, install the magnet on the
magnet spacer plate (item 3).
Note:
The tamper plate (item 1) contains a separate magnet.
Do not replace it by the magnet spacer plate (item 3),
otherwise the pry-off tamper supervision will fail.
© 2022 Carrier
0.75 in.
19.1 mm
1.5 in.
0.75 in.
38.1 mm
19.1 mm
1.5 in.
38.1 mm
( ) 4
( ) 5
( ) 6
( ) 7
( ) 8
( ) 9
Because this is a triple biased contact, there is a minimum
mounting distance between the magnetic contact and the
magnet. This distance is:
During installation the switching distances have to be
individually determined for each contact.
When the installation is completed, the electrical switch
function of the magnetic contact must be checked (for
example, with a continuity checker or multimeter). Use of
mechanical force, for example, when installing, can damage
glass bodies of reed switches.
Note:
doors can bend under temperature influence.
Wiring description
Item
(4)
(5)
(6)
(7)
(8)
1 / 12
2 in.
51 mm
(1)
(2)
( ) 3
For non-ferromagnetic material: minimum of 10 mm
between magnetic contact and magnet.
For ferromagnetic material: minimum of 8 mm between
magnetic contact and magnet.
When installing the contact please keep in mind that the
Color
Description
White
Alarm, normally closed
Red/White
Alarm, normally open
Silver/White
Alarm, COM
Gold/White
Tamper, COM
Green/White
Magnet tamper, normally closed
P/N 1069822 (ML) • REV F • ISS 08NOV22
0.19
in.
4.8 mm
1.5
in.
(2)
38.1 mm
Z
Y
X
Tabla de contenido
loading

Resumen de contenidos para Aritech DC111

  • Página 4: Descripción Del Cableado

    Para obtener seguridad adicional, incluye • 2 tornillos también un tamper de campo magnético y un tamper de extracción. DC111 puede utilizarse en entornos y puertas que sean ferromagnéticos o no. Especificaciones Longitud del cable 2.5 m Montaje <...
  • Página 10: Pt: Ficha De Instalação

    à superfície, que pode ser ligado a um −10 do +55°C sistema de alarme anti-roubo. Para segurança adicional, inclui também um tamper de campo magnético e um tamper removível. O DC111 pode ser utilizado em ambientes e portas Informacje prawne ferromagnéticos e não ferromagnéticos. Producent WPROWADZONE NA RYNEK PRZEZ: Carrier Fire &...
  • Página 11: Conteúdo Da Embalagem

    Dimensões do íman 19,1 mm Beskrivning Tensão máxima de comutação 30 V DC111 är en trippel-bias ytmonterad magnetkontakt som kan Corrente máxima de comutação 0,25 A anslutas till ett inbrottslarmsystem. Som extra säkerhet inkluderas även magnetkontakt och sabotagekontakt. DC111 −28 a +65°C Temperatura de funcionamento kan användas på...

Tabla de contenido